Industrial Floor Coatings · Epoxy Coatings · Polyurea Coatings · Concrete Coatings

Protective Coating for Concrete

Performance coatings may be a popular method of prolonging the life of concrete, but specifying the right product to protect a concrete structure isn’t always as simple as it sounds. And that’s where an expert like SPI Performance Coatings can help.
There are lots of factors to consider, including the age and condition of the concrete, the harshness of its environment and the presence of abrasive chemicals or natural forces like ground movement. The quality of the coating, the standard of the surface preparation and any application restrictions are also important too, of course. The most important thing is to specify the right solution for your specific requirements. Match the right coating to the conditions and you will have effective, value-for-money protection that lasts. Fail to do so – and you could be left counting the cost sooner than you might think. Before we look at the materials themselves, there are a couple of important factors to consider. The first is product quality and like anything, you can get good quality and poor quality. In many cases, you may think you are purchasing a pure product, when in fact you’re buying a hybrid mix. Think of it like an old cut-and-shut car – you might think you’re buying a good quality motor, but closer investigation shows that two defective, potentially dangerous products are being sold as something else with false marketing claims. The key to avoiding this is to get to know your manufacturer of choice closely so you can judge them, as well as their products (for the record, ours is a pint of bitter, we’ll meet you in the local where we can tell you about our products with nothing to hide). The other is around performance and safety testing. Many companies, across Europe in particular, rely on in-house testing for their CE accreditation. It might be legally acceptable, but it doesn’t take a genius to work out it won’t hold the same merit as third-party testing. Ask before you buy. OK, so we’ve cleared up that up. Now what are the options?

Epoxies

Pros
  • Perform well in highly chemically corrosive environments like sewage treatment facilities or chemical processing plants
  • More forgiving of damp substrates and the presence of moisture
Cons
  • Relatively low elongation factor – less suitable for applications which are subject to ground movement and dynamic cracking, like bunds and square concrete tanks in biogas and wastewater sites
  • Other coatings offer quicker application and drying times – not suitable for busy power generation plants or industrial processing environments where fast return to service is key

GRP

Pros
  • Hard wearing and can last a long time in less demanding conditions
  • One of the oldest coatings solutions available – familiar to many creatures of habit
  • Commonly used for lining concrete bunds and tanks
Cons
  • Slow application because it is built up in layers of resin and matting over a couple of days
  • Unadvisable for harsh chemical environments or where dynamic cracking is likely

Polyurethane

Pros
  • Popular for the protection of commercial and industrial flooring thanks to its easy-to-apply, paint-on application methods
Cons
  • Highly odorous during application which may make it less suitable for closely occupied spaces
  • Not recommended for environments susceptible to movement because the bond between the concrete and the coating is often weak

Polyurea

Pros
  • Outperforms all other coating systems on the market
  • Rapid return to service application – touch dry in a matter of seconds
  • Minimal surface preparation
  • Unrivaled performance when coping with ground or structure movement and extreme changes in temperature
  • Particularly suited for the protection of tanks, reservoir roofs and gas digesters
Cons
Facebook
Twitter
LinkedIn

Sounds interesting? Get In Touch

    Do you need a custom quote for your project?